Product ID:EC-117 BMS 10-11 TYPE I
MSDS Date:01/29/1996
FSC:8010
NIIN:00F053380
Kit Part:Y
MSDS Number: CDRGG

DEXTER CORP PACKAGING PRODUCTS DIV

1 EAST WATER ST
WAUKEGAN, IL 60085-5614
US

Emergency Phone: 847-623-4200

Info Phone: 847-623-4200

Cage: 91342

DEXTER CORP THE PACKAGING PRODUCTS DIV

WAUKEGAN, IL 60085-5614 US

Telephone: 847-623-4200

Cage: 91342

DIMETHYL AMINMETHYLPHENOL MIXTURE

Fraction By Weight: <10%

ETHYL BENZENE *96-4*

CAS: 100-41-4

RTECS: DA0700000

Fraction By Weight: 10-20%

OSHA PEL 435 MG/CUM

ACGIH TLV: 434 MG/CUM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

XYLENE, DIMETHYLBENZENE, XYLOL (IARC - GROUP 3) *96-4*

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 40-50%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM, SKIN

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

ISOPROPANOL (ISOPROPYL ALCOHOL), 2-PROPANOL, DIMETHYL

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 30-40%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM

BENZENE (SUSPECTED HUMAN CARC BY ACGIH, IARC, ANIMAL

CAS: 71-43-2

RTECS: CY1400000

Fraction By Weight: 0.00804%

ACGIH TLV: 0.3 MG/CUM (A2) IC

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION TO THE
RESPIRATORY TRACT. SKIN/EYES: IRRITATION. PRODUCT MAY BE ABSORBED
THRU THE EYES, SKIN, INHALATION & INGESTION ROUTE.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:IRRITATION, HEADACHE, DIZZINESS, DROWSINESS.

First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
INGESTION: DRINK WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:SCC
Flash Point:64F
Lower Limits:1
Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL/CO2.
Unusual Fire/Explosion Hazard:FLAMMABLE LIQUID-CLASS IB

Spill Release Procedures:REMOVE IGNITION SOURCES. VENTILATE AREA.
REMOVE W/INERT ABSORBANT & NON-SPARKING TOOLS.

Handling and Storage Precautions:CONTAINERS SHOULD BE GROUNDED WHEN
POURING. AVOID FREE FALL OF LIQUID IN EXCESS OF A FEW INCHES. DRUM
SHOULD BE INDUSTRIALLY CLEANED PRIOR TO REUSE.
Other Precautions:DON'T TAKE INTERNALLY. MAKE SURE THE DRUM IS
COMPLETELY EMPTY BEFORE ATTEMPTING TO WELD/BRAZE. DON'T FLAME CUT,
BRAZE/WELD W/O NIOSH APPROVED RESPIRATOR/APPROPRIATE VENTILATION.
AVOID BREATHING VAPORS .

Respiratory Protection:WHERE GENERAL DILUTION/LOCAL EXHAUST FAILS TO
ADEQUATELY DILUTE THE TWA/PEL, WEAR APPROPRIATE, PROPERLY FITTED
RESPIRATOR APPROVED BY NIOSH/OSHA. AN AIR LINE RESPIRATOR IS
RECOMMENDED.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST VENTILATION.
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:REQUIRED
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health

Boiling Pt:B.P. Text:180-300F
Vapor Density:>1
VOC Grams/Liter:6.6

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:WELDING: CO, OXIDES OF NITROGEN.

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS. PAINT, UN1263.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.